The position of floater inside non-magnetic connection tube shall synchronous change with liquid level inside the tanker. A magnetic smart float or shutter is installed inside the indicator that is attached to the external surface of the connection tube.

Magnetic coupling level indicator K-TEK

The position of floater inside non-magnetic connection tube shall synchronous change with liquid level inside the tanker. A magnetic smart float or shutter is installed inside

the indicator that is attached to the external surface of the connection tube. Interconnection between the magnetic smart float outside the tube and the non-magnetic float inside the tube will happen, as a result, the position of float inside the connection tube can be known. This instrument can replace plate-glass level meter, and can be safely used for level measurement of erosive, flammable and poisonous liquid.

Sphere of application: industry such as metallurgy, chemical engineering, environmental protection, power station, paper making, transportation and foodstuff.

characteristic:
firm in structure
Multiple connection mode and multiple material available for selection
specially designed float
Indicator has night-vision fluorescence which will make it easy to read in the night
The sphere of application in terms of pressure and temperature is large.
Multiple accessories can be installed with it, so as to realize functions such as

Producing alarm signal via switch signal, accurate level transformer, steam/electric heat tracing, lightning protection device, and so on.
Technical data
Measurement length
determined by customer
Range of Operation pressure
vacuum to 316Bar
operation temperature
from -195℃ to +538℃
Medium density
＞0.25
medium viscosity
maximum 1500CP
material inside liquid
nearly 30 type of material, including 316/316L, can be selected
mounting means

KM26T

Side-side, top-side, side-bottom, top-bottom, level/interface, top installation
Interface position
The minimum value allowed for specific gravity difference between two different medium can be as small as 0.03.
Size for process connection
1/2”to 3” flange,(150#、300#、600#、1500#)
equipped with pneumatic switch
Air supply:1.05 to 7.03kg/cm2, connector:1/8”NPT
electrical switch equipped
MS-30, reed switch SPDT, 250VAC 1A, intrinsic-safety and explosion-proof type
MS-21,mercury switch SPDT, 250VDC, 4A, intrinsic-safety and explosion-proof type
MS-40, cam and magnetic driven switch DPDT 250VAC, 10A

intrinsic-safety and explosion-proof type
Magnetoconstriction level transducer AT200 (external attachment type)
Accuracy: 0.01% in full range

Measurement range: 1 to 15m
Output: 4 to 20mA, 13.5 to 36VDC, selectable display content include: liquid

level, temperature and HART
Intrinsic safety, explosion proof: flame-proof type
AT600A
Installation: bind to connection tube KM26 with stainless steel belt
Accuracy: 0.02% in full range
Measurement range: 0.3 to 4.9m
Output: 4 to 20mA, 13.5 to 36VDC
Intrinsic safety, explosion proof: flame-proof type