It is new generation of level measurement product with high accuracy. it utilizes

magnetostriction technology and use impulsator to produce waveguide pulse. After

being transformed in electronic section, the waveguide pulse is turned into current pulse spreading along waveguide line. The magnetic field produced by the current moving along waveguide line and the magnetic field produced by magnetic ring are

superimposed over one another to produce tension pulse.

K-TEK magnetostrictiontype liquid level meter

It is new generation of level measurement product with high accuracy. it utilizes

magnetostriction technology and use impulsator to produce waveguide pulse. After

being transformed in electronic section, the waveguide pulse is turned into current pulse spreading along waveguide line. The magnetic field produced by the current moving

along waveguide line and the magnetic field produced by magnetic ring are

superimposed over one another to produce tension pulse. This pulse will return back along

waveguide line. The time difference between these two pulse waves can be used for

calculation of liquid level.

Sphere of application: industry such as metallurgy, chemical engineering, environmental protection, power station, paper making, transportation and foodstuff. It is especially

Ideal for level measurement of LPG tanker and tank.
Characteristic
high accuracy,
stable and reliable
long service life
elaborate in structure
easy for installation
technical data
measurement range
150 to 3000
service voltage
+24VDC±10%
form of output
4 to 20mA/24VDC
maximum output load: 600Ω

±00FSNonlinearity±00FS
better than 0.05 below 300mm
maximum error:150μm
repetitiveness
better than 0.002%FS
resolution
better than 0.002%FS
sluggish
better than 0.002%FS
operation temperature
-40℃~+85℃ for side pole
-20℃~+85℃ for electronic sector
storage temperature
-40℃ to 100℃
temperature coefficient
0.007%/℃
full range adjustment
20%FS
zero point correction
20% FS
ripples
low-noise environment150 to 3000mm
smaller than 2mVrms
dynamic measurement1600 to 3000mm
smaller than 10 mVrms
material for side pole
0Cr19Ni9
material for cover of electronic unit
1Cr18Ni9Ti
cable
general explosion-proof type, five-core shield cable
intrinsic safety cable: three-core shield cable 2.8mlength: 2.8m
hazardous rating
explosion-proof type：Exd II BT5
intrinsic safety type：Exia II CT5
cover protection rating：IP65